Remove and replace body side heat shield above muffler
Remove front wheels to gain access to brake assemblies. Depress hydraulic brake pistons- remove pads from calipers. Remove brake calipers to access and remove rotors. Replace pads and rotors.
Clean, inspect for damage or wear and lubricate.
Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
Codes: # PU522, P0520
Remove intake manifold, remove and replace oil pressure sensor switch, install new upper and lower intake manifold gaskets with intake
Use diagnostic tool to find malfunctioning/inactive TPMS sensor
-Remove tire from rim to access and replace sensor. Remount and balance tire. Reprogram sensor.
THOMAS D. gave our service a 5 star review on 8/16/2022
Lubricate and check chassis. Change oil and oil filter. Check all fluid levels, tire pressures and test vehicle battery.
-Remove wheels to access brakes assemblies. Remove drums to access hardware and shoes. Clean, adjust and lubricate backing plate and replace shoes, drums and hardware.
Remove backseat to gain access to fuel pump, remove fuel pump and install fuel level sensor, replace and confirm gauge is accurate
BRODY S. gave our service a 5 star review on 8/5/2022
Lubricate and check chassis. Change oil and oil filter. Check all fluid levels, tire pressures and test vehicle battery.
Replace worn wiper blades
-Access filter box, clean debris from air box, air ducts and intake cowl, disinfect and replace filter.
-Access and remove engine air filter, clean filter box and install new filter.
Using scanner, retract brake caliper pistons
Remove rear wheels to gain access to brake assemblies. Depress hydraulic brake pistons- remove pads from calipers. Remove brake calipers in order to remove rotors. Replace Pads and rotors.
-Clean, inspect for damage or wear- lubricate and check for proper function.
Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
STEVEN G. gave our service a 5 star review on 8/3/2022