Check wiring and voltage output locating bad blower motor resistor
Remove and replace blower motor resistor
Remove and replace left front brake pad sensor and harness
Remove lens assembly and bulb cover housing to replace left inner brake light bulb and reinstall
Lubricate and check chassis. Change oil and oil filter. Check all fluid levels, tire pressures and test vehicle battery.
Filled with washer fluid and found no leaks present
-Unfasten and remove plastic lining/panel below glove box to access filter box, clean debris from air box, air ducts and intake cowl, disinfect and replace filter and reinstall
-Remove engine cover, air intake, and unfasten filter housing to access and remove engine air filter, clean filter box and install new filter reinstalling previous components
Service air conditioner. Evacuate and recharge with freon check condition of all belts and lines. Check for leaks and test system performance.
ALEX A. gave our service a 5 star review on 9/24/2022
Remove front wheels to gain access to brake assemblies. Depress hydraulic brake pistons- remove pads from calipers. Remove brake calipers to access and remove rotors. Replace pads and rotors.
Clean, inspect for damage or wear and lubricate.
Remove rear wheels to gain access to brake assemblies. Depress hydraulic brake pistons- remove pads from calipers. Remove brake calipers in order to remove rotors. Replace Pads and rotors.
Perform electronic parking brake retraction using scan tool
-Clean, inspect for damage or wear- lubricate and check for proper function.
Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
ALEX A. gave our service a 5 star review on 9/19/2022