Road test vehicle to duplicate noise. Raise in lift and inspect all front and rear suspension components for wear, damage, or play. Found only immediate issue is the right rear upper control arm bent needing to be replaced.
Raise vehicle, remove wheel, and apply heat/lubricant to rusted mounting bolts. Support rear and hub. Extract old control arm and clean surface area. Install new upper control arm, reinstall previous components, and confirm repairs.
AAA 10% discount off labor
JACOB R. gave our service a 5 star review on 4/13/2024
Remove rear wheels to gain access to brake assemblies. Depress hydraulic brake pistons- remove pads from calipers. Remove brake calipers in order to remove rotors. Replace pads and rotors.
-Clean, inspect for damage or wear- lubricate and check for proper function.
Using scanner, retract brake caliper pistons
Remove front wheels to gain access to brake assemblies. Depress hydraulic brake pistons- remove pads from calipers. Remove brake calipers to access and remove rotors. Replace pads and rotors.
Clean, inspect for damage or wear and lubricate.
Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
Mount two new rear tires
Spin balance tires
Rotate new tires to front of vehicle
JONI M. gave our service a 5 star review on 4/10/2024