Inspect wheel assemblies, brakes- pads, rotors and all fluid lines for leaks or damage, including suspension for proper function and security. Inspect vehicle's frame, chassis and drive train for corrosion or damage. Inspect engine and all engine components for abnormal wear, leaks or loose components. Brakes-Front: 5B Rear: 8B Tires- 5/32"
Replace key fob battery
Raise vehicle, remove rear wheels, and peel back portion of fender liner to access and unbolt top shock mounts. Lift/support rear suspension and unbolt lower mounts extracting shocks. Clean surface area, install new shocks, and reinstall previous components.
ALVIN G. gave our service a 5 star review on 5/2/2024
Lubricate and check chassis. Change oil and oil filter. Check all fluid levels, tire pressures and test vehicle battery.
Remove rear wheels to gain access to brake assemblies. Depress hydraulic brake pistons- remove pads from calipers. Remove brake calipers in order to remove rotors. Replace pads and rotors.
-Clean, inspect for damage or wear- lubricate and check for proper function.
Drain brake fluid, remove all hardware, clamps, fittings, and brake hose. Remove old mounting bracket and caliper. Clean, install new caliper, brake hose, and bleed free of air.
Mount two new front tires
Spin balance tires
ERIC S. gave our service a 5 star review on 4/29/2024
Codes: # P0430 -Catalyst System Efficiency Below Threshold (Bank 2)
Raise vehicle, remove splash shields, and drain coolant. Remove engine covers, battery, and radiator fans to access and unbolt manifold/converter. Lower heat shields and extract old unit from vehicle. Clean surface area free of rust and debris. Install new converter, oxygen sensors, and reinstall previous components. Fill coolant and confirm repairs.
KERRY H. gave our service a 5 star review on 4/29/2024
Noise/clunking heard during road test. Raise on lift and inspect all front end suspension components for proper operation. Apply pressure to test struts and control arms locating noise from left front arm. Retorque all mounting bolts and confirm repairs.
Mount two new rear tires
Spin balance tires
Rotate new tires to front of vehicle
Remove wheel, braking components, and separate axle shaft to unbolt and remove hub assembly. Press out old bearing and clean surface area. Lubricate, install new bearing to hub, and reinstall previous components confirming repairs.
Shop hydraulic press fee
Replace right side brake light bulb
Replace right side high beam headlight bulb
PEGGY M. gave our service a 5 star review on 4/28/2024