2014 Honda Civic
Mileage
99,585
Service Date
2/27/2024
Services Performed
- State Safety Inspection
- Emissions test
- Support right side of engine and disconnect vacuum hoses. Remove bolts and brackets to extract old mount assembly. Clean, lubricate, install new mount, and reinstall previous components.
- Access hose, remove clamps, and disconnect mass air flow sensor. Extract old hose and clean mating surfaces before installing new air intake hose.
- Remove front wheels to gain access to brake assemblies. Depress hydraulic brake pistons- remove pads from calipers. Remove brake calipers to access and remove rotors. Replace pads and rotors.
- Clean, inspect for damage or wear and lubricate.
- Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
- Raise vehicle, remove wheel, and unfasten splash shields and fender liner to separate old axle from hub and transaxle. Clean surface areas free of debris. Install new axle shaft, reinstall previous components, and road test vehicle.
RAYMOND T. gave our service a 5 star review on 2/27/2024
